5 recommended "residential fire alarms" to detect heat and smoke to prepare for emergencies [2022 latest version]
The "fire alarm" is a device that detects heat and smoke and warns with a buzzer. Since the revised Fire Service Law came into effect on June 1, 2006, it has become obligatory to install "residential fire alarms" in rooms and above stairs in newly built houses.
Nittan "Kemutan-chan" (Source: Amazon)Introducing recommended products for "residential fire alarms", a must-have item to prepare for the unlikely event of a fire.
The detection method is mainly "heat" and "smoke"
The mainstream of residential fire alarms is to detect either "heat" or "smoke".
Choose the "smoke" or "heat" detection type according to the room where it is installed. The photo is Nomi Bosai "Mamoru-kun" (Source: Amazon)The smoke detection type detects the smoke generated in the early stages of a fire, so it is effective for early detection of fires. Commonly installed in bedrooms, stairs and hallways.
On the other hand, the heat detection type is suitable for kitchens where cooking produces smoke even if there is no fire. It should be noted that the detection of fire is delayed compared to the smoke type, because the fire will not react unless the fire reaches a certain size and the ambient temperature of the sensor rises.
There are fire alarms that use batteries and those that use household power. Since the battery type has a battery life of about 10 years, it seems that the whole body is often replaced when the battery runs out. Also, the type that uses a household power supply requires electrical wiring work, and may not work in the event of a power failure.
Wireless interlocking type that notifies with voice Panasonic "Kemuri Toban"
Panasonic "Kemuri Toban thin type 2 (SHK79021P)" is a wireless interlocking residential use that notifies the origin of the fire by voice when a fire is detected. It's a fire alarm.
Panasonic "Kemuri Toban Thin Type 2 (SHK79021P)" (Source: Panasonic)Smoke detection type suitable for rooms other than the kitchen, and up to 15 units can be interlocked. Even in a house with a large number of rooms, fires can be notified throughout the house. In addition, since the name of the room where the fire originated is announced by voice, the origin of the fire can be quickly identified and dealt with.
In addition, if you turn off the alarm sound in a room other than the fire source, all alarm sounds other than the fire source will stop. You'll know right away that the ringing room is the source of the fire. The direct sales price for a set of one parent unit and one child unit is 18,700 yen (including tax, the same below).
Check Rakuten for detailsThe heat-sensing type Panasonic "Netsu Toban" that can be linked with the smoke duty
The Panasonic "Netsu Toban thin constant temperature type (SHK7040P)" has smoke in the kitchen and other places on a daily basis. An alarm suitable for installation in places where It can be linked with the aforementioned smoke duty.
Panasonic "Netsu Toban Thin Constant Temperature Type (SHK7040P)" (Source: Panasonic)The structure of the detection unit has been improved, and non-fire alarms due to lint and cotton dust (not a fire) alarms) are minimized.
When 10 years have passed since installation, the operation light (red) will flash, and in addition, a voice will notify you of the need to replace the equipment. It adopts a thin flat design that is easy to match with the interior. The direct sales price is 4190 yen.
Check Rakuten for detailsAutomatic adjustment of fire detection Hochiki "Standalone SS-2LT"
Hochiki is said to have developed and installed Japan's first fire alarm. "Standalone SS-2LT" is a smoke detection type residential fire alarm.
Hochiki "Standalone SS-2LT" (Source: Amazon)Equipped with a "learning function" that automatically adjusts the fire judgment according to the room environment. In addition, it has a "sensitivity correction function" that automatically repairs dirt inside the sensor, so it can be used safely for a long time.
You can also use the sleep function to minimize power consumption. The selling price is 2200 yen. There is also a heat sensing type "SS-FL".
Check details on Amazon Check details on RakutenMonitoring sensitivity changes due to dirt, etc. Nittan "Kemutan-chan"
"Kemutan-chan (KRH-1B)" is a disaster prevention manufacturer of the Secom Group , Nittan's smoke detector. Equipped with a sensitivity correction function, it constantly monitors changes in sensitivity due to dirt, etc., and automatically corrects them. This can reduce malfunctions due to aging, so you can rest assured.
Nittan "Kemutan-chan (KRH-1B)" (Source: Amazon)Equipped with "Pair Voice 2" as a unique feature. It alternates between female and male voices. It is also equipped with a function that makes it difficult to issue a low battery warning in the middle of the night or early in the morning.
The selling price is 2,180 yen. The product name of the heat sensing type is "Netsutan-chan".
Check details on Amazon Check details on RakutenEasy-to-hear warning sound for everyone from children to the elderly Nohmi Bosai ``Mamoru-kun''
``Mamoru-kun smoke type (FSKJ225-B-N)'' is the largest This is a general residential fire alarm from Nohmi Bosai, a comprehensive disaster prevention equipment manufacturer engaged in firefighting equipment construction business.
"Mamoru-kun smoke type (FSKJ225-B-N)" (Source: Amazon)The basic structure has been completely revised from the previous model to achieve a compact shape while maintaining performance. Notifies you of fires and abnormalities by voice. By adopting a sweep sound with a frequency band of 300Hz to 4kHz, the fire alarm sound is easy to hear for everyone from children to the elderly.
The selling price of the smoke detection type is 2737 yen. A heat sensing type "FSLJ015-B-N" is also available.
Check the details on AmazonCheck the details on Rakuten